China Professional Custom Hydraulic Auto Steering System Steering Rack Steering Gear Lzsu-2 with Best Sales

Product Description

Custom Hydraulic Auto Steering System Steering Rack Steering Gear LZSU-2

The auto steering system steering rack steering gear LZSU-2 height is 763mm, and the height can be changed, it can be raised for 56mm, and it can tilting backward. The steering wheel diameter 380mm or 350mm, the steering column shroud is plastic injection moulding to ensure the using under the temperature from -50ºC-80ºC. The inner steel frame is powder coating or galvanized type to prevent rust.
The steering gear can install 6 rocker switches, the functions of the rocker switches can be customized according to your requirements.
The assembly mode to the machine with splinie key or parallel key.
The CZPT point is located in the middle of the steering column assembly, adjustment range is 27.9 degrees backward (driver). Pull the locking handle on the left side, turning the steering column to the proper position, turn the locking handle to lock the steering machine.
This steering column is ergonomically designed for the construction machinery, agricultural machinery ,mining macinery and special vehicles.

Features:

1. Restores precise steering
2. Made to ensure safe and reliable driving
3. Manufactured from durable materials to last
4. Tough construction to withstand everyday wear and tea

We provide custom rocker switches, combined switches, ignition switch, instrument clusters, gear selectors for the inside cabin for your selection.

We Provide Customized Steering Gear According To You Needs.

We Are Professional Manufacturer Since 1996, Providing Customized And OEM ,One Station Solution.

 

The steering gear is a device intended primarily for connecting the steering wheel to the steering mechanism.

The steering column adopts modular design, which is divided into instrument cluster modules, switch modules, control modules, electrical distribution box modules, wiring harness modules which can be arbitrarily matched according to different needs of customers.

The steering column shroud is plastic injection moulding from durable materials, and tough construction to withstand everyday wear and tear ,it can using under -50ºC to 80 ºC. Energy dissipation management in the event of a frontal collision to ensure safe and reliable driving. The inside components are plastic injection moulding or galvanised to prevent rust.

Depend on the space of your machinery cabin and operator convenience ,we offer different models of steering column assembly, all the steering column can be made with different installation plate according to your need. The steering column is mounted on the hydraulic power steering pump through the keys , we have parallel key and spline key.

We offer are sure to satisfy your OEM needs and guarantee proper precis steering and handling at all times.

Product Name Steering Gear LZSU-2

MOQ

1Piece
Supply Ability 1000 Pieces/month

Packing

 Standard Exprot Carton

 

Hot Selling Products

 

 

 

HangZhou CZPT Construction Machinery Co., Ltd. was established in 1996 and have developed to be a professional manufacturer and providing customized and OEM products. We are a high-tech. enterprise in China, our company is certified according to ISO 9001:2015.

We providing mini excavator, forklift, anticorrosion tape, waterproof tape, instrument cluster assembly, cabin assembly, steering column assembly, seat assembly, wiring harness assembly and other spare parts for variety of construction machinery, mining machinery, agricultural machinery, special vehicle machinery. You can choose in combination or individually according to your needs.

In our company 60% of employees are R&D personnel. Hence, we have good ability to research and develop new technologies and products which help us to be 1 of the leaders in China markets. We can design and develop the products with advanced technical performance as per the clients’ requirements, and suitable for various construction machinery, mining machinery, agricultural machinery, special vehicle machinery.

We have cabin assembly workshop, steering column assembly workshop,seat assembly workshop, wire harness assembly workshop,instrument cluster assembly workshop,sheet metal processing workshop,spray paint and power coating workshop.CZPT products have achieved high reputation in construction machinery industry at home and aboard, which are regarded as “the leader in China “by universal customers. Our partners have Shantui, Liugong, Zoomlion,Yishan, Xihu (West Lake) Dis., CRCC etc and have been distributed into more than 30 countries and regions such as Korean, Indonesia, Malaysia, Philippines, Singapore, Vietnam, Thailand, India, Pakistan, Qatar, Oman, Kuwait, Kazakhstan, Turkey etc.

Our orientation: Strive to provide high-quality products and contribute to increase satisfaction for our clients through our advanced technique, perfect process, reasonable prices and considerate service.

Packaging & Shipping

FAQ

 

1. Are you original manufacturer?
   Zhineng construction machinery is professional manufacturer since 1996 , we provide customized and OEM service, 1 station solution.

2. Which incoterms 2571 terms can we work?
    We normally work on FOB, CFR, CIF, CIP.

3. How about the delivery?
    15-30 days after first payment , if your product is customized ,may will cost little longer time.

4.What payment terms can we accept?
   Normally, we can work on T/T or L/C terms.

5. What logistics ways we can work for shipment?
    We can delivery the product by sea, truck, train, air, express delivery.
 

Type: Steering Gear
Material: Alloy Steel ,Plastic
Certification: AISI, DIN, CE, ASTM, JIS, GB, BS, DOT
Automatic: Semi-Automatic
Standard: Standard
Condition: New
Samples:
US$ 350/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Gear

How to Design a Forging Spur Gear

Before you start designing your own spur gear, you need to understand its main components. Among them are Forging, Keyway, Spline, Set screw and other types. Understanding the differences between these types of spur gears is essential for making an informed decision. To learn more, keep reading. Also, don’t hesitate to contact me for assistance! Listed below are some helpful tips and tricks to design a spur gear. Hopefully, they will help you design the spur gear of your dreams.

Forging spur gears

Forging spur gears is one of the most important processes of automotive transmission components. The manufacturing process is complex and involves several steps, such as blank spheroidizing, hot forging, annealing, phosphating, and saponification. The material used for spur gears is typically 20CrMnTi. The process is completed by applying a continuous through extrusion forming method with dies designed for the sizing band length L and Splitting angle thickness T.
The process of forging spur gears can also use polyacetal (POM), a strong plastic commonly used for the manufacture of gears. This material is easy to mold and shape, and after hardening, it is extremely stiff and abrasion resistant. A number of metals and alloys are used for spur gears, including forged steel, stainless steel, and aluminum. Listed below are the different types of materials used in gear manufacturing and their advantages and disadvantages.
A spur gear’s tooth size is measured in modules, or m. Each number represents the number of teeth in the gear. As the number of teeth increases, so does its size. In general, the higher the number of teeth, the larger the module is. A high module gear has a large pressure angle. It’s also important to remember that spur gears must have the same module as the gears they are used to drive.

Set screw spur gears

A modern industry cannot function without set screw spur gears. These gears are highly efficient and are widely used in a variety of applications. Their design involves the calculation of speed and torque, which are both critical factors. The MEP model, for instance, considers the changing rigidity of a tooth pair along its path. The results are used to determine the type of spur gear required. Listed below are some tips for choosing a spur gear:
Type A. This type of gear does not have a hub. The gear itself is flat with a small hole in the middle. Set screw gears are most commonly used for lightweight applications without loads. The metal thickness can range from 0.25 mm to 3 mm. Set screw gears are also used for large machines that need to be strong and durable. This article provides an introduction to the different types of spur gears and how they differ from one another.
Pin Hub. Pin hub spur gears use a set screw to secure the pin. These gears are often connected to a shaft by dowel, spring, or roll pins. The pin is drilled to the precise diameter to fit inside the gear, so that it does not come loose. Pin hub spur gears have high tolerances, as the hole is not large enough to completely grip the shaft. This type of gear is generally the most expensive of the three.
Gear

Keyway spur gears

In today’s modern industry, spur gear transmissions are widely used to transfer power. These types of transmissions provide excellent efficiency but can be susceptible to power losses. These losses must be estimated during the design process. A key component of this analysis is the calculation of the contact area (2b) of the gear pair. However, this value is not necessarily applicable to every spur gear. Here are some examples of how to calculate this area. (See Figure 2)
Spur gears are characterized by having teeth parallel to the shafts and axis, and a pitch line velocity of up to 25 m/s is considered high. In addition, they are more efficient than helical gears of the same size. Unlike helical gears, spur gears are generally considered positive gears. They are often used for applications in which noise control is not an issue. The symmetry of the spur gear makes them especially suitable for applications where a constant speed is required.
Besides using a helical spur gear for the transmission, the gear can also have a standard tooth shape. Unlike helical gears, spur gears with an involute tooth form have thick roots, which prevents wear from the teeth. These gears are easily made with conventional production tools. The involute shape is an ideal choice for small-scale production and is one of the most popular types of spur gears.

Spline spur gears

When considering the types of spur gears that are used, it’s important to note the differences between the two. A spur gear, also called an involute gear, generates torque and regulates speed. It’s most common in car engines, but is also used in everyday appliances. However, one of the most significant drawbacks of spur gears is their noise. Because spur gears mesh only one tooth at a time, they create a high amount of stress and noise, making them unsuitable for everyday use.
The contact stress distribution chart represents the flank area of each gear tooth and the distance in both the axial and profile direction. A high contact area is located toward the center of the gear, which is caused by the micro-geometry of the gear. A positive l value indicates that there is no misalignment of the spline teeth on the interface with the helix hand. The opposite is true for negative l values.
Using an upper bound technique, Abdul and Dean studied the forging of spur gear forms. They assumed that the tooth profile would be a straight line. They also examined the non-dimensional forging pressure of a spline. Spline spur gears are commonly used in motors, gearboxes, and drills. The strength of spur gears and splines is primarily dependent on their radii and tooth diameter.
SUS303 and SUS304 stainless steel spur gears

Stainless steel spur gears are manufactured using different techniques, which depend on the material and the application. The most common process used in manufacturing them is cutting. Other processes involve rolling, casting, and forging. In addition, plastic spur gears are produced by injection molding, depending on the quantity of production required. SUS303 and SUS304 stainless steel spur gears can be made using a variety of materials, including structural carbon steel S45C, gray cast iron FC200, nonferrous metal C3604, engineering plastic MC901, and stainless steel.
The differences between 304 and 303 stainless steel spur gears lie in their composition. The two types of stainless steel share a common design, but have varying chemical compositions. China and Japan use the letters SUS304 and SUS303, which refer to their varying degrees of composition. As with most types of stainless steel, the two different grades are made to be used in industrial applications, such as planetary gears and spur gears.
Gear

Stainless steel spur gears

There are several things to look for in a stainless steel spur gear, including the diametral pitch, the number of teeth per unit diameter, and the angular velocity of the teeth. All of these aspects are critical to the performance of a spur gear, and the proper dimensional measurements are essential to the design and functionality of a spur gear. Those in the industry should be familiar with the terms used to describe spur gear parts, both to ensure clarity in production and in purchase orders.
A spur gear is a type of precision cylindrical gear with parallel teeth arranged in a rim. It is used in various applications, such as outboard motors, winches, construction equipment, lawn and garden equipment, turbine drives, pumps, centrifuges, and a variety of other machines. A spur gear is typically made from stainless steel and has a high level of durability. It is the most commonly used type of gear.
Stainless steel spur gears can come in many different shapes and sizes. Stainless steel spur gears are generally made of SUS304 or SUS303 stainless steel, which are used for their higher machinability. These gears are then heat-treated with nitriding or tooth surface induction. Unlike conventional gears, which need tooth grinding after heat-treating, stainless steel spur gears have a low wear rate and high machinability.

China Professional Custom Hydraulic Auto Steering System Steering Rack Steering Gear Lzsu-2   with Best Sales China Professional Custom Hydraulic Auto Steering System Steering Rack Steering Gear Lzsu-2   with Best Sales
editor by CX 2023-11-10

Rack and Pinion

As one of the rack and pinion manufacturers, suppliers, and exporters of mechanical products, We offer rack and pinion and many other products.

Please get in touch with us for details.

Mail:[email protected]

Manufacturer supplier exporter of rack and pinion.

Recent Posts